Twin bunk beds with stairs – First, measure from the floor to the top of the upper bunk base. Record measurement. Second, cut the two pieces of wood that will serve as the sides of the stairs using the measurement you recorded. Cut 45-degree angles at both ends of each piece of wood. This is necessary so that each side will place squarely against the floor and the side of the upper bunk.
Cut the last piece of wood into 12-inch lengths. These will serve as steps for the stairs of twin bunk beds with stairs. Sand the edges of each piece of wood to smooth out unevenness. Fourth, add the two sides of the stairs on the ground, then measure and mark the 1-foot intervals along the length of each side.
12 Photos Gallery of: Make Stairs To Twin Bunk Beds With Stairs
Attach step to the sides of the selected intervals with nails. Stand set of stairs up and lean it against the side of the top bunk. The staircase should be upright with 45 degree angle sides towards the top bunk and the floor. Last, the final steps to the bunk bed. Drill holes through the top of each side of the stairs and into the bunk. Place the bolts into each hole and attach them to keep the staircase in place. Your creative twin bunk beds with stairs were done.