Rustic wine rack – The wine is often depicted in attractive racks that are designed to be mounted securely to a wall. Because wine is heavy, most wine racks are also designed to carry a lot of weight, and also to keep the wine corks stay moist. This means that the frame should be level and mounted according to the manufacturer’s instructions. In all cases, a wall rustic wine rack should be screwed directly into studs or other important materials from the wall so it will not fall and cause injury or damage.
Examine the installation requirements rustic wine rack to determine the weight of the load of the rack when it is at capacity. The weight of the load will be your guide for the type of mounting clip which will have to bear that weight on your wall. Select a cleat French – type mounting system that is designed to maintain the capacity of the rustic wine rack. Determine the location where you want to place the wine rack. Mark the width of the shelf on the wall with light pencil.
21 Photos Gallery of: Mounting A Rustic Wine Rack Wall
Look at the back of the wine rack. If the frame has a solid wood back, you have to mount the cleat of a third or a quarter of the length from the top edge. If the frame has an open back, you may need to mount the cleat on the top edge or where there is substantial enough wood to screw in the fastening system. Measuring a horizontal line level, and mount fixing system looking down at the back of the wine rack. Transfer your height measurements of the wall. Mark where you want the top wine rack to be and how low the cleat is in the back of the rack. Add rubber bumpers on the bottom corners of the back of the rustic wine rack, if the fastening system will make the rustic wine rack to hang unevenly or tilt forward along the top front.